Instructions for the Doulton Model SS
1. Remove the filter and ceramic elements from their protective packaging, checking each item against the diagram.
NOTE: The number of elements supplied will depend on the type of unit purchased. There will be one element for each hole in the base of the top section.
2. Extreme cleanliness is important. Wash hands before handling the water filter unit and ensure that contamination does not take place during assembly.
3. Fit the knob (1) onto the lid (2) by inserting the screw (3)through the hole in the lid and screwing on the knob, hand tighten only.
4. Place the sealing washer (10) over the threaded part of the ceramic element (5).
5. Place the element(s) (5) into the hole(s) in the base of the top section (4).
6. Secure the element(s) in place by screwing the wing nut (11) onto the nipple part of the element.
7. Place o washer (8) onto the threaded part of the water spigot (7).
8. Insert the thread through the hole in the side of the water filter's bottom section (6). Place the second washer (8) over the thread and secure the spigot in place with the nut (9).
9. Put the top section (4) onto the bottom section (6) of the water filter unit, and place the lid in position.
Operation of the Doulton Model SS unit
1. Ensure the water spigot (7) is in the "off" position.
2 Fill the top section (4) with water.
NOTE: We recommend that the first supply of filtered water is thrown away as it may contain loose material washed from the filter elements.
Servicing the Doulton Model SS unit
When the doulton water filter unit has been assembled as described above, weekly inspection and/or cleaning of the ceramic filter element(s) is the only servicing necessary.
1. Remove the element(s) from the top section (4) by unscrewing the wing nut (1).
2. Hold the element (s) under running water or in a bowl of water and clean with a stiff brush or scotchbrite pad.
Always brush away fro the nipple end.
NOTE: NEVER use soap or detergents to clean the filter element(s)
3. Reassemble as detailed in instructions above.
NOTE: The element(s) should be replaced annually.
NOTE: This gravity filter is designed to remove harmful bacteria from water, not dissolved chemicals.
For questions contact the US distributor: Doulton Water at contact@doulton-water.com
Doulton Water is a division of Life in Paradise, 286 S. Purcell Blvd, Pueblo West, CO 81007
|